Troubleshooting
Here is a guide to troubleshooting
The guide at http://www.solidoodle.com/how-to-2/troubleshooting/ covers the basic trouble shooting problems. This Wiki will link to more advanced topics, and the opinions of the community on various topics related to troubleshooting.
I great place to start your journey of knowledge is Ian Johnson's Solidoodle Tips blog.
If you do not find your answers either on the official site or here, some of the community sites.
- Help!! My Solidoodle has a hole in the orange Kapton tape!
- help, my Solidoodle arrived broken
- help, my Solidoodle has been in transit for a long time.
- Help!! My Solidoodle won't connect
- help, my nozzle is clogged
Print Troubleshooting
- Help!! The filament is not sticking to the bed!
- Help!! My prints aren't centered!
- Help!! My prints keep drooping along the edges!
- Help!! My printer is making popping/cracking/hissing sound while extruding!
- Help!! I want to reset my Repetier Host Printer Settings to the default!
Hardware Troubleshooting
- Help!! My print head only moves in one direction!
- Help!! My printer keeps shifting along one axis!
- Help!! I accidentally extruded too far and can't pull my filament out of the extruder!
- Help!! My extruder is printing in mid air!
- Filament curling/not extruding
- Help! There are filament shavings in my extruder!
- Hot End Stops Being Hot