Slic3r Settings for Solidoodle 2 at 0.2mm
avoid_crossing_perimeters 0
bed_size 159,150
bed_temperature 0
bottom_solid_layers 3
bridge_acceleration 0
bridge_fan_speed 100
bridge_flow_ratio 1
bridge_speed 75
brim_width 0
complete_objects 0
cooling 1
default_acceleration 0
disable_fan_first_layers 1
duplicate 1
duplicate_distance 6
duplicate_grid 1,1
end_gcode
external_perimeter_speed 35
external_perimeters_first 0
extra_perimeters 1
extruder_clearance_height 20
extruder_clearance_radius 20
extruder_offset 0x0
extrusion_axis E
extrusion_multiplier 1
extrusion_width .42
fan_always_on 0
fan_below_layer_time 60
filament_diameter 3
fill_angle 45
fill_density .3
fill_pattern honeycomb
first_layer_bed_temperature 0
first_layer_extrusion_width .42
first_layer_height .3500
first_layer_speed 75%
first_layer_temperature 200
g0 0
gap_fill_speed 30
gcode_arcs 0
gcode_comments 0
gcode_flavor reprap
infill_acceleration 0
infill_every_layers 2
infill_extruder 1
infill_extrusion_width .42
infill_first 0
infill_only_where_needed
infill_speed 60
layer_gcode
layer_height 0.200
max_fan_speed 100
min_fan_speed 35
min_print_speed 10
min_skirt_length 0
notes
nozzle_diameter .4
only_retract_when_crossing_perimeters 0
output_filename_format [input_filename_base].gcode
perimeter_acceleration 0
perimeter_extruder 1
perimeter_extrusion_width .42
perimeter_speed 50
perimeters 3
post_process
print_center 75,75
raft_layers 0
randomize_start
resolution 0
retract_before_travel 2
retract_layer_change 1
retract_length 2.5
retract_length_toolchange 3
retract_lift 0
retract_restart_extra 0
retract_restart_extra_toolchange 0
retract_speed 150
rotate 0
scale 1
skirt_distance 6
skirt_height 1
skirts 1
slowdown_below_layer_time 30
small_perimeter_speed 40
solid_fill_pattern rectilinear
solid_infill_below_area 0
solid_infill_every_layers 0
solid_infill_extrusion_width .42
solid_infill_speed 60
start_gcode
support_material 0
support_material_angle 0
support_material_enforce_layers 0
support_material_extruder 1
support_material_extrusion_width .31
support_material_interface_layers 0
support_material_interface_spacing 0
support_material_pattern rectilinear
support_material_spacing 2.5
support_material_speed 50
support_material_threshold 45
temperature 200
threads 2
toolchange_gcode
top_infill_extrusion_width .42
top_solid_infill_speed 40
top_solid_layers 3
travel_speed 75
use_relative_e_distances 0
vibration_limit 0
z_offset 0
Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License