Slic3r Settings for Solidoodle 2 at 0.1mm
| avoid_crossing_perimeters | 0 |
| bed_size | 159,150 |
| bed_temperature | 0 |
| bottom_solid_layers | 3 |
| bridge_acceleration | 0 |
| bridge_fan_speed | 100 |
| bridge_flow_ratio | 1 |
| bridge_speed | 75 |
| brim_width | 0 |
| complete_objects | 0 |
| cooling | 1 |
| default_acceleration | 0 |
| disable_fan_first_layers | 1 |
| duplicate | 1 |
| duplicate_distance | 6 |
| duplicate_grid | 1,1 |
| end_gcode | |
| external_perimeter_speed | 30 |
| external_perimeters_first | 0 |
| extra_perimeters | 1 |
| extruder_clearance_height | 20 |
| extruder_clearance_radius | 20 |
| extruder_offset | 0x0 |
| extrusion_axis | E |
| extrusion_multiplier | 1 |
| extrusion_width | .42 |
| fan_always_on | 0 |
| fan_below_layer_time | 60 |
| filament_diameter | 1.75 |
| fill_angle | 45 |
| fill_density | .3 |
| fill_pattern | honeycomb |
| first_layer_bed_temperature | 0 |
| first_layer_extrusion_width | .42 |
| first_layer_height | .3500 |
| first_layer_speed | 75% |
| first_layer_temperature | 200 |
| g0 | 0 |
| gap_fill_speed | 30 |
| gcode_arcs | 0 |
| gcode_comments | 0 |
| gcode_flavor | reprap |
| infill_acceleration | 0 |
| infill_every_layers | 3 |
| infill_extruder | 1 |
| infill_extrusion_width | .42 |
| infill_first | 0 |
| infill_only_where_needed | |
| infill_speed | 60 |
| layer_gcode | |
| layer_height | 0.100 |
| max_fan_speed | 100 |
| min_fan_speed | 35 |
| min_print_speed | 10 |
| min_skirt_length | 0 |
| notes | |
| nozzle_diameter | .4 |
| only_retract_when_crossing_perimeters | 0 |
| output_filename_format | [input_filename_base].gcode |
| perimeter_acceleration | 0 |
| perimeter_extruder | 1 |
| perimeter_extrusion_width | .42 |
| perimeter_speed | 45 |
| perimeters | 3 |
| post_process | |
| print_center | 75,75 |
| raft_layers | 0 |
| randomize_start | |
| resolution | 0 |
| retract_before_travel | 2 |
| retract_layer_change | 1 |
| retract_length | 2.5 |
| retract_length_toolchange | 3 |
| retract_lift | 0 |
| retract_restart_extra | 0 |
| retract_restart_extra_toolchange | 0 |
| retract_speed | 150 |
| rotate | 0 |
| scale | 1 |
| skirt_distance | 6 |
| skirt_height | 1 |
| skirts | 1 |
| slowdown_below_layer_time | 30 |
| small_perimeter_speed | 35 |
| solid_fill_pattern | rectilinear |
| solid_infill_below_area | 0 |
| solid_infill_every_layers | 0 |
| solid_infill_extrusion_width | .42 |
| solid_infill_speed | 60 |
| start_gcode | |
| support_material | 0 |
| support_material_angle | 0 |
| support_material_enforce_layers | 0 |
| support_material_extruder | 1 |
| support_material_extrusion_width | .31 |
| support_material_interface_layers | 0 |
| support_material_interface_spacing | 0 |
| support_material_pattern | rectilinear |
| support_material_spacing | 2.5 |
| support_material_speed | 50 |
| support_material_threshold | 45 |
| temperature | 200 |
| threads | 2 |
| toolchange_gcode | |
| top_infill_extrusion_width | .42 |
| top_solid_infill_speed | 35 |
| top_solid_layers | 4 |
| travel_speed | 75 |
| use_relative_e_distances | 0 |
| vibration_limit | 0 |
| z_offset | 0 |