Repetier Host Printer Configuration- Windows

Connection

Port: whichever port your printer is hooked up to
Baud Rate: 250,000
Stop Bits: 1
Parity: None
Transfer Protocol: Autodetect or ASCII
Receive Cache Size: 63
Use Ping-Pong Communication: Unchecked

Printer

Travel Feed Rate: 4800
Z-Axis Feed Rate: 100
Default Extruder Temperature: 195
Default Heated Bed Temperature: 90
Number of Extruder: 1
Check extruder & heated bed: Checked
Remove M105 Requests from Log: Checked
Check every: 3 second (use the sliding bar to set)
for the Solidoodle 2
Park Position: X = 150, Y = 150, Z = 15
for the Solidoodle 3
Park Position: X = 200, Y = 200, Z = 15
Got to Park Position after Job/Kill: Checked
Disable Extruder after Job/Kill: Checked
Disable Heated Bed after Job/Kill: Unchecked
Disable Motors after Job/Kill: Checked
Add to comp. Printing Time: 8

Printer Shape for Solidoodle 2

Printer Type: L_CARTESIAN_PRINTER
Home X = Max
Home Y = Max
Home Z = Min
X Min = 0
X Max = 159
Bed Left = 0
Y Min = 0
Y Max = 150
Bed Front = 0
Print Area Width: 159
Print Area Depth: 150
Print Area Height: 150

Printer Shape for Solidoodle 3

Printer Type: L_CARTESIAN_PRINTER
Home X = Max
Home Y = Max
Home Z = Min
X Min = 0
X Max = 205
Bed Left = 0
Y Min = 0
Y Max = 170
Bed Front = 0
Print Area Width: 170
Print Area Depth: 200
Print Area Height: 200

Advanced

Filter Path and Parameter: leave blank
Run filter after every slice: Unchecked

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License